Information about Palm OS(R) Emulator(POSE) CLIE(TM) handheld ROM image-supported version (2000.11.01)


[General]

-To emulate the PEG-S300, right-click on the emulator and begin a new session.  Select PEG-S300 for "Device" and select the S300 ROM image for "ROM File". (Make sure the appropriate color/mono device is selected for the desired ROM image)

-The emulator will not function when PEG-S500C/300 is selected and a ROM image from another vendor is used.


[Memory Stick(R) media removable memory]

-To switch in/out of the Memory Stick(R) media, press the "In/Out" button located at the upper right of the emulator.

-A virtual folder of the Memory Stick(R) media will be created in the same folder as Emulator.exe as you boot the emulator. Its size will be one of the following:

  Ms8:8Mbyte MS / Ms16:16Mbyte MS / Ms32:32Mbyte MS /
  Ms64:64Mbyte MS / Ms128:128Mbyte MS

-To emulate the write-protect mode of the Memory Stick(R) media, make the newly created MS* folder "read only" in the folder's properties. Make sure the Memory Stick(R) media is removed from your CLIE(TM) handheld as you emulate this, or it will not function correctly.


[Jog Dial(TM) navigator]

-For each JogEvent, press "Push" to issue vchrJogPress; re-press "Push" to issue vchrJogRelease.

-Select the "Push" option and push either "Up" or "Down" to emulate pressing in and rotating the Jog Dial(TM) navigator.


# The latest version may be downloaded from:
http://www.us.sonypdadev.com/top.html 
(You will need to register as a member before downloading)
# CLIE, Jog Dial and Memory Stick(R) are trademarks of Sony Corporation.
# Palm OS is a trademark of Palm,Inc.

Copyright 2000 Sony Corporation