Information about Palm OS(R) Emulator (POSE) for CLIE(TM) Handheld PEG-N610C/S320 version


[General]


-The Palm OS Emulator for Sony CLIE PEG-N610C/PEG-S320 program is freeware and should be used at your own risk.
 Select any versions (excluding the earliest) of GNU GENERAL PUBLIC LICENSE   given out from Free Software Foundation.
 You can distribute or make changes to the program so long as the distribution or changes conform to the program's contract clauses. Supply the program with GNU GENERAL PUBLIC LICENSE.

-Note that the program emulates only PEG-N610C/S320.

-To emulate PEG-N610C/S320, begin a new session and select PEG-N610C/S320 for Device, N610C/S320 ROM image for ROM File, and 8192K for RAM Size.

-The program does not completely emulate PEG-N610C/S320 hardware, so the final validation should be made on an actual device.



[Memory Stick(R) media removable memory]

-To emulate insertion and removal of the Memory Stick(R) media, press the In/Out button located at the left side of the emulator.

-A virtual folder of the Memory Stick(R) media will be created in the same folder as Emulator.exe as you boot the emulator. Its size will be one of the following:

  Ms8:8Mbyte MS / Ms16:16Mbyte MS / Ms32:32Mbyte MS /
  Ms64:64Mbyte MS / Ms128:128Mbyte MS

-To emulate the write-protect mode of the Memory Stick(R) media, make the newly created MS* folder "read only" in the folder's properties. Make sure the Memory Stick(R) media is removed from your CLIE(TM) handheld as you emulate this, or it will not function correctly.


[Jog Dial(TM) navigator]

-For each JogEvent, press "Push" to issue vchrJogPush; press "Push" again to issue vchrJogRelease.

-Select the "Push" option and push either "Up" or "Down" to emulate pressing in and rotating the Jog Dial(TM) navigator.


[Others]

-If you install an application file without setting the emulator to ON, it may freeze.

-The Save Bound Emulator function works only with Windows(R) NT4.0 and Windows 2000 Professional Edition.

-If you select Save, Save As, or Save Screen, you need to manually add saved file extensions (e.g., .psf .bmp, etc.).

-From the Properties option: If you start the schedule application and set an alarm with Enable sounds selected, it may not go off on time.

-One tap may be recognized as two if the emulator is used on a high speed PC such as its CPU having more than 500MHz clock speed.

-From the Install Application/Database option: If you try to install a prc file using a former log with no prc file present in the Path, the system will quit the menu without doing any processing. (No warning message will appear on the screen.)

-If you use this emulator with Code Warrior connected, your application might fail to execute debug mode operations or to transfer the target program.

-If you have the caps lock on when you run the emulator, it will give you a dialog box that allows you to start a new session.  If you do not have caps lock on, the emulator will try to load the last session, which may cause problems if the previous session was for another device.


# The latest version may be downloaded from:
http://www.us.sonypdadev.com/top.html
(You will need to register as a member before downloading)
# CLIE, Jog Dial and Memory Stick are trademarks of Sony Corporation.
# Palm OS is a trademark of Palm,Inc. Windows is a registered trademark of Microsoft Corporation.


Copyright 2000-2001 Sony Corporation
